Contact: Mr. Zhao
Telephone: +86-18841775200
Address: Steel Industrial Park, Laobian District, Yingkou City, Liaoning Province
Post Code: 115005
Website: http://www.redgreenstocks.com/en
1、 Overview
This product is made of high efficiency antirust agent, lubricant, emulsifier, surfactant and other raw materials by special process. This product can be mixed with mineral oil in the ratio of 1:3. It is easy to be emulsified and used in a small amount. The prepared working fluid has no peculiar smell and has good lubrication, cooling, cleaning and anti rust properties. Widely used in turning, grinding, milling and other machining processes.
2、 Technical index (emulsified oil)
project | quality index | test method (refer to SH / t0365) | ||
Oil based appearance (15-35 ℃) | Brownish red oil | Visual inspection | ||
Emulsion pH 5% | 8.0～9.5 | SH/T 0365-92 | ||
Emulsion stability (15-35 ℃), 24h ml | soap | ≤0.5 | ||
oil | 無(wú) | |||
Salt allowance （15～35℃）， 4h | No phase separation | |||
Antirust property of emulsion ((35 ℃± 2 ℃) Cast iron sheet | Single chip 24h | qualified | ||
Lamination 4H | qualified | |||
Emulsion corrosion test (55 ± 2 ℃), full immersion | 45 × 24h steel | qualified | ||
62 × brass 4H | qualified | |||
Ly16 aluminum 4H | qualified | |||
Defoaming performance ml / 10min ≤ | 2 | SH / t0365-1992 Appendix E | ||
3、 How to use it
The viscosity of mineral oil should be 10-20 mm2gs. The prepared emulsified oil can be mixed with water in any proportion to form an emulsion. The recommended concentration is 3-5%. Different concentrations can be prepared according to the processing difficulty and climate.
4、 Note:
1. When preparing the new solution, the water should be drained first and then the original solution should be added, and it can be used only after being stirred evenly.
2. The total hardness of the water used to prepare the working fluid shall not exceed 300ppm, otherwise the stability of the working fluid may be decreased, and the serious case will not be emulsified.
3. The equipment is equipped with magnetic filter and other filtering devices to remove impurities in time.
4. This product can't be mixed with other cutting fluids, so as not to affect the use effect. If it needs to be mixed, it can be used only after it is tested and feasible.
5. 5 ~ 35 ℃ indoor sealed storage. In the process of storage and transportation, it is necessary to prevent the mixing of water and impurities, so as to avoid the deterioration of products.
5、 Packaging, storage and transportation
1. Package: 20 l or 200 L barrel.
2. This product is nontoxic and nonflammable. It can be used for general commodity storage and transportation
